Construction Primers
- Greatly pervasive, seals well all fine porous surfaces, such as all types of lime-cement and lime-sand plasters, cement-fiber surfaces, panels made of gypsum and gypsum board, lime, bricks, concrete, aerated concrete, as well as slightly desalinating and sandy, but strong bases;
- Evenly distributes the water absorbance – the fine nano particles permeate the macro and micro pores and strengthen and seal the surface in depth, while evening its water absorbing properties
- Hydro- and cold-resistance
- Resistance to wet rubbing and washing
- Easy application
- Seals the dust
- Almost no smell, which makes it quite suitable for work in inhabitable spaces and food warehouses
- For interior and exterior application
- With green control colour
- Especially suitable for priming of gypsum board, drywalls and bases, intended for the fitting of heat insulation systems.
The fine Nano particles penetrate within the macro and micro pores of the surface, strengthen it and seal it in depth, balancing its water absorption. After drying it strengthens the primed surface and increases its water repulsion. It is specially recommended for priming gypsum board, gypsum fibreboard, and bases on which would be installed thermal insulation systems.
| Consumption |
|---|
| 75 – 250 gr/m² diluted in ratio 1:10 primer. The indicative consumption varies depending on: The type of the surface (smooth, rough, primed, not primed, drywall, gypsum plaster, cement-based plaster, mortar, concrete); The instruments for application (brush, roller, spray gun); Way of application (wet on wet, with 1/2 or 1/3 overlapping); Temperature and moisture of the air. |